Setting Time: This cement and its precision applicator are not intended to join articles with a large surface area. They are designed for precision applications. The cement bonds quickly and completely dries within 24 hours. It is washable. Hand washing recommended. Do not dry clean.
Solubility: Remove excess with a small amount of acetone or nail polish remover. Multiple applications may be required to remove excess, depending on how much cement was used.
Surface Preparation: The two surfaces being joined should be clean and free from dirt. The cement is recommended for porous-to-porous and porous-to-non-porous applications.
Storage: Place cap wire in applicator when not in use to stop the flow of cement. Always clean the precision applicator and tube neck with acetone or nail polish remover before closing the cap. This will prevent drops of cement from sealing the cap to the tube. To close: Carefully lay applicator flat against finger to help guide the cap wire into the precision applicator. Store G-S Hypo Fabric Cement at room temperature. Do not refrigerate, freeze or store in direct sunlight.
Tube Size: 4″ x 5/8″ (101.6 x 15.9mm), 1/3 fl. oz. (9ml)
Instructions: Included inside box in English, Spanish, French and German.
CAUTION: KEEP OUT OF REACH OF CHILDREN AND PETS. Highly flammable. Irritating to eyes. Repeated exposure may cause skin dryness or cracking. Use in well-ventilated area. Vapors may cause drowsiness and dizziness. Keep away from sources of ignition. Do not breathe vapor. Avoid contact with eyes. If contact occurs, rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with plenty of soap and water. SHARP POINT. Recommended for ages 12 and over. Conforms to ASTM D4236.